Wavlink WiFi Extender Setup

Get setup

Do you want to perform a Wavlink WiFi extender setup through wifi.wavlink.com? If yes, then don’t worry! You have reached the right spot! With a Wavlink WiFi extender setup, you can easily boost the wireless extender speed and will get the interrupted wireless network signals. With this extender device, you can extend the wireless signals to every corner of your home or office. If you are trying to do wavlink range extender setup for the first time and don’t know how to do it then read this article till the end. Here, we have described the simple steps for the Wavlink range extender setup.

Procedure For Wavlink WiFi Extender Setup Through Wifi.Wavlink.Com

Through wifi.wavlink.com, you can easily complete the Wavlink range extender setup. Once you reached the Wavlink extender login webpage, you can configure the basic as well as advanced settings of your device. Go through the below instructions for Wavlink WiFi extender setup:

Step 1: The first step is to plugin the Wavlink WiFi extender into a power socket that is nearer to the existing wireless router.
Step 2: Turn on the power button. Wait for some time until a steady power light displays on your extender.
Step 3: Take any WiFi-enabled device and go to the WiFi settings. You need to connect to the default SSID or network name of the Wavlink WiFi extender.
Step 4: Enter the password or passkey and connect to the unsecured WiFi network of the wireless extender.
Step 5: Now, you will be navigated to the Wavlink WiFi extender login webpage where it is asked to enter the login credential details including the username and password of the Wavlink extender.
Step 6: If you fail to open the extender login page then you need to launch an internet browser and enter wifi.wavlink.com in the URL bar.

Wavlink range extender setup,Wavlink AC1200 Setup

Step 7: Open another internet browser to set up the extended wireless network through Wavlink WiFi repeater ap.setup. Type http://ap.setup in the URL bar of the internet browser.
Step 8: Once you enter all the required details, you can access the Wavlink WiFi extender setup wizard. Thereafter, you are able to extend the wireless network of your existing WiFi router.
Step 9: Hit on the wireless network that you want to extend. Fill in the password of the wireless network of the existing router.
Step 10: Now, you can customize the WiFi settings of your extended network.
Step 11: Next, enter the wireless credential login details for your Wavlink WiFi range extender.
Step 12: After completing the configuration settings, tap on the Save button.

With these steps, you can easily complete the Wavlink WiFi range extender setup.

Wavlink Range Extender Setup Through WPS Button

Through the WPS button, you can easily expand the existing wireless network of your Wavlink WiFi range extender setup. Look at the below steps for Wavlink range extender setup via the WPS button:

Step 1: Firstly, plugin your extender into the power socket. Turn on the power button of the Wavlink extender.
Step 2: After that, press the WPS button of the extender. Within two minutes, also press the router’s power button.
Step 3: Once the WPS connection is set up successfully then you will see that the power LED light turns to a blue color.
Step 4: After establishing a Wavlink extender setup, you can enjoy the expanded and high-speed wireless network signals.

How to change the Wifi password of a Wavlink router?

The wi-fi password for the router is different from the login password. The wi-fi password can be used to access the router’s network and the login password is used to interact with the wifi.wavlink.com interface. If you don’t have a wifi password you are unable to access the wifi connection of the router’s network. The wifi password is configured during the Wavlink setup process. If you want to change this password follow the below steps:

Open the router’s configuration page in order to change the wi-fi password.
Now, launch a browser and type 192.168.10.1 in the address bar of the browser.
You will see the default login page.
If you haven’t changed the default admin settings, enter the ‘admin’ for both the username and password.
You can easily change the default language of the web management page from the list and click on login.
Now, go to the wi-fi tab and select the settings tab. Then, click on the wireless settings tab.
You can enter the SSID and password for the networks.
If you want you can change the wifi channels.

After that, when all configurations are made you can click on the apply button.
Now, wait till the settings are applied to the router.
Lastly, you can also change the security type of the network through the wireless setting page.

How to update the firmware of the Wavlink router?

The firmware updates are necessary for the better performance of the Wavlink routers. With change in the firmwares new updates will enhance the functioning and security of the routers. Before you interact with the web interface, first visit the Wavlink download center to download the firmware updates. Model number and product name will be available on the packaging box.

The below steps will help you to update the firmware Wavlink router:

First, visit the downloading center of the Wavlink router.
Now, mention your model and product names in the available fields.
Click download, when asked for.
Now, save the downloaded firmware file on the computer.
Extract the files from the zip format.
Again, open your wi-fi settings and search for the available networks.
Now, connect the wifi network to the Wvalink device.

It will automatically redirect you to the Wavlink management page.
In case, if you are not directed to the configuration page, type wifi.wavlink.com in the address bar and hit enter.
You can also write 192. 168.10.1 as the URL of the browser.
Now, you will see the default login page.
Type the login password you entered during the login process.
In case, you are login for the first time, enter ‘admin’ in the password field.
You will see the ‘menu Dashboard’ of the wavlink.
Now, from the main navigation panel go to the address tab, and select updates option.
Click on the browser and navigate the cursor to the location where the firmware file was downloaded.
Now, select the file and click on upgrade to begin the update process.
Do not switch off the router in the middle of the update process.
You will see that the router will reboot once the updates are successfully completed.
Now, when the router turns on, reconnect it to the wifi and visit the web interface.
At last, go to the status tab and confirm the installation of the firmware.

That’s All! These are some simple and easiest ways to configure the Wavlink range extender setup. Once you complete the extender setup process, you can boost the WiFi range and speed even to the dead zones without establishing a physical connection with your router. The antenna comes along with the extender helps you in extended the wireless range. In case, you face any difficulty then don’t feel hesitate to call our experts at our helpline number.