A reset restores your modem to its factory defaulting settings. It will also rub out any tailored settings you may well have changed containing the static IP address setup, DNS, modified password, WiFi settings, routing, and DHCP settings. If you have convention settings, you can back up your settings previous to doing the modem reset and then reinstate them again one time the reset is done. If your Internet is running gradually or you are experiencing other connectivity concerns with your Comcast router or modem, it’s a good quality plan to either retune your gateway to factory defaults or simply resume it. The precise method for Reset Xfinity Router or modem can show a discrepancy to some extent by the model. For Comcast router combos, resetting the router to factory settings will also retune the modem — thus, the terms router, modem, and gateway are over and over again used interchangeably.

How to Reset Xfinity Router – Easy Methods Explained

Resetting your modem will swab all the preceding router configurations — incorporating wifi network name, password, login info, etc. — thus reinstating it to factory defaulting. This is diverse than resuming your router, which does not clear any settings and just brings your network down and back up. Previous to discovering how to retune your modem, it’s significant to talk about when it is suitable to do a factory retune.

If your modem isn’t working right, or if you replaced some settings you can’t unknot, you may make a decision it’s time to retune your modem to its default settings. Previous to you do, however, it’s always of some value doing a simple reboot first. If you haven’t already tried rebooting (resuming) your modem, see the instructions for three diverse ways you can reboot. A full factory reset returns your modem to its out-of-the-box settings and may fix the following concerns:

Gaming troubles
Routing faults
Can’t link to the internet errors
Slow link speeds
Choppy VOIP
Port correlation issues
Wireless network issues
Device conflicts

Before retuning your router, try restarting it first. Unplug it from the wall, wait 10-20 seconds, then plug it back in. Then wait for a few minutes whilst it powers back up. If that doesn’t solve your network issues, you can arrange differently your router. But, be warned: resetting your router will reinstate it to factory default settings, meaning you’ll remove all settings, customizations, the network name, password, etc.

Why Might You Need Your Xfinity Router Reset?

The Xfinity router is almost certainly the most significant part of any Wi-Fi setup in view of the fact that it gives internet access from your computer to the rest of the world. This lets you to do pretty much something on the internet like stream movies, play games, etc. The trouble here is that if there is not an adequate amount of space in the hard drive then this can lead to matters such as slow link speeds and even no intranet at all. There are many causes why your Xfinity gateway might require to be reset, and these might include:

You obtain the error messages when trying to unite to your XFINITY Wi-Fi system that says such things as ‘Cannot connect existing connection’ or ‘cannot set up new connection’.
Your XFINITY Wi-Fi link keeps dropping out.
There is a message on the status page saying that the device has been activated or deactivated, but it does not work correctly.
The router is not working perfectly – some routers have issues where they don’t upgrade their firmware which causes them to bring to a close functioning exactly.
No intranet signal after resetting the modem. This trouble occurs when there is intrusion between the signal being transmit from the Xfinity Modem and other devices broadcasting in the area. Modems need to be set up accurately in order for the internet to function correctly.

Steps to Reset Your Xfinity Modem/Router

Find the Reset Button – The retune button is more often than not on the back or bottom of your router. Make use of a paperclip or pen to push and grasp the reset button.

Release the Button – After waiting, liberate the button and wait for your router to reboot. This can take up to 5 minutes.

Connect to Your Router – Once your router is back online, link to it by entering its IP address into your web browser. The IP address is typically somewhat like 192.168.0.1 or 10.0.0.1. If you don’t recognize the IP address, you can check the documents that came with your router. Or Refer to our guide on logging into your Xfinity router for further support.

Load the Xfinity Setup Page – If you observe the Xfinity setup page, congrats! You’ve productively reset your router. From here, you can start setting up your home network again. If you don’t observe the setup page, try resuming your supercomputer and trying again. But, you may require contacting the Xfinity for support if that doesn’t work.

Steps to retune Your Xfinity Router through the Web

If your Xfinity router doesn’t have a retune button, you can also try resetting by accessing your router from the web.

Open a Web Browser – First, open a web browser. You can make use of Chrome, Firefox, Safari, Edge, Brave, etc.; any browser will work.
Type Your Router’s IP Address – Enter your router’s IP address. Again, the IP address is typically somewhat like 192.168.0.1 ]. If you don’t identify it, check the documentation that came with your router.
Login to Your Router – Enter your username and password for your Xfinity account to log in to your router.
Navigate to the Reset Page -Once logged in, look for a page called “reset,” “reboot,” or a little similar.
Click the Reset Button – Click the retune button on this page.
Confirm the Reset – You may require confirming that you want to rearrange your router. If so, click “OK” or “reset.”
Wait for Your Router to Reboot – After clacking the retune button, your router will reboot. This can take up to 5 minutes.
Connect to Your Router – Once your router is back online, link to it by typing its IP address into your web browser.
Load the Xfinity Setup Page – You’ve effectively reset your router if you observe the Xfinity setup page. From here, you set up your home network (again).

If this didn’t work, restart the web browser and try again. If that didn’t work, restart your computer and attempt a third try. Still out of luck? In that case, get in touch with Comcast Xfinity support. Keep in mind that resetting your router will erase all your custom settings. So if you have any specific settings that you need to keep, make sure to back them up before resetting your router.

Advanced Features: Restart with the Admin Tool

Ensure that you’re linked to your home network.
Open a web browser, enter http://10.0.0.1 to go to the Admin Tool, and sign in.

The Username and Password is not the similar as your WiFi name and password. If you haven’t changed your Admin Tool login, the default settings are:

Username: admin
Password: password (case sensitive)Once signed in, steer to Troubleshooting > Restore Gateway. From here, you have 5 reset options:
RESET — Resums the gateway the same as unplugging and plugging it back in.
RESET WIFI Module — Turn off your gateway’s WiFi radio and then turns it back on.
RESET WIFI Router — This is the equivalent as rebooting a wireless router attached to a cable modem.
RESTORE WIFI Settings — This entirely resumes your WiFi settings (e.g., SSID/WiFi network name, WiFi password) on your wireless gateway to the factory default values. This results in being disconnected from your WiFi network, and you will have to Reset Xfinity Router Password
RESTORE Factory Settings — This alternative wholly restores your wireless gateway settings back to their factory defaulting values, containing firewall settings, managed devices, parental controls, WiFi credentials, etc. This alternative will provisionally detach you from the network. If prompted, modify the WiFi name and password and relink devices to your home network by means of these credentials. A restart is diverse than a factory reset. A factory reset retunes your gateway to its unique default settings, including your WiFi name and password. If prompted, you’ll be necessary to make a custom WiFi name and password and relink devices to your home network by this info.

To manually restore factory settings, follow the following steps depending on your gateway model.

Locate the retune button on the back of the gateway and make use of a non-metallic pointed object (such as a toothpick) to embrace in the Reset button for 30 seconds till all the LED lights power off. If your gateway does not have a retune button, locate the WPS button and clutch it for 30 seconds.

A reset may fix the concerns with your home network like irregular connection, dropping connection, awful signal, devices being booted, etc. It can also assist if you’re setting up your home net for the first time and having difficulty getting the whole thing working. And finally, if you’re selling or giving away your router, you’ll want to retune it to eliminate your personal info.

Conclusion

Xfinity Router Password Reset is done by pressing and holding the retune button or through the router’s login page. But, if you have difficulties resetting it, you might have to unite with our customer support for assistance.

Also Checkout – Wireless Extender Setup